IEC 60794-5-1 Optical fibre cables – Family specification – Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing 6 Microduct 6.1 Tests applicable Tests shall be selected from Table 3, in accordance with the relevant product specification. If the microduct is only to be used in a protected microduct, some tests…
1 Scope This part of ISO 1167 specifies a general test method for determining the resistance to internal hydrostatic pressure at a given temperature of thermoplastics pipes, fittings and piping systems for the transport of fluids. The method accommodates water-in-water, water-in-air and water-in-liquid tests. 4 Principle After conditioning, test pieces are subjected to a specified…
Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008) 1 Scope This part of ISO 11357 specifies methods for the determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) of polymeric materials by means of differential scanning calorimetry…
Laboratory CNC milling machine from AHP PLASTIK MAKINA has 3 version. Samples of up to 50mm thickness, 100mm thickness and higher than 100mm based on customer request. In two first versions we have possibility of having spindles with two types of tool holder ER16 and ER 20. ER16 collet has possibility of holding tools 2,3,4,5,6,7,8,9,10mm….
Paraffinic waxes are used for many industrial and consumer applications. We manufacture test and analysis equipment for paraffin wax to determine a wide range of chemical and physical properties. Paraffin was analysis can include purity, contamination, trace components, melting point, oil content and more. Here lets see some of these tests in brief. A- Drop…
7.1.1.3 End Item—Domestic and domestic/fire retardant classes of corrugated fiberboard, constructed as specified in 6.4, shall conform to the requirements in Table 1 for bursting strength or puncture resistance or edge crush (as specified) when tested as specified in 9.1.3, 9.1.5, or 9.1.8. (See compliance statement following Table 1 for Burst and Edge Crush.)7.1.2 Weather-Resistant…
Applications in the medical and pharmaceutical industry
9.1 Type tests and test sequences 9.1.1 The characteristics of circuit-breakers are verified by means of type tests. Type tests required by this standard are listed in table 8. 9.2 Test conditions The circuit-breaker is mounted individually, vertically and in free air at an ambient temperature between 20 °C and 25 °C, unless otherwise specified,…
5 Apparatus5.1 Heating equipment, consisting of one of the following (5.1.1, 5.1.2 or 5.1.3) that will accept aminimum of two test frame assemblies and a cooling device (5.1.4).The heating equipment shall be provided with means of temperature control, enabling the temperatureto be raised at a uniform rate of (50 ± 5) K/h or (120 ±…
1 Scope This part of ISO 4589 specifies methods for determining the minimum concentration of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index values. Methods are provided for testing materials that are self-supporting in the form of vertical…
