1. PURPOSE OF THE MACHINE This machine is designed to: The quality of the notch directly affects test results, so precision and repeatability are critical. 2. WORKING PRINCIPLE The machine operates by: 3. MACHINE COMPONENTS Based on your machine type, main parts include: 4. SAFETY INSTRUCTIONS ⚠️ MUST FOLLOW: NEVER: ⚠️ Danger: Sharp cutting blade…
Laboratory CNC milling machine from AHP PLASTIK MAKINA has 3 version. Samples of up to 50mm thickness, 100mm thickness and higher than 100mm based on customer request. In two first versions we have possibility of having spindles with two types of tool holder ER16 and ER 20. ER16 collet has possibility of holding tools 2,3,4,5,6,7,8,9,10mm….
5 Apparatus and auxiliary materials5.1 ApparatusThe apparatus shall include:5.1.1 Device, consisting of one or several cylindrical test chambers, horizontally positioned, with theinside dimensions of (152,4 ± 1,0) mm in depth and (146,0 ± 1,0) mm in diameter. In the centre of eachchamber is a horizontal shaft with cross rods (impellers) which rotate at 1 200…
1- Main power key // 2-Emergency Key // 3- Spindle Turning speed // 4- Run key // 5-Vaccum Key // 6-Vacuum line // 7-Milling tool // 8-Sample fixing tools // 9-Handle for moving the sample piece // 10-Y axis movement rails // 11-X axis movement rails
7 Test methods for insole and insock7.1 Determination of insole thickness Cut through the sole in the region of the cleat and measure the thickness of the insole using a graduatedeyepiece with 0,1 mm scale graduations.7.2 Determination of water absorption and desorption of insole and insock7.2.1 PrincipleA test piece is positioned on a wet base…
4 Test facility4.1 GeneralThe SBI test facility shall consist of a test room, the test apparatus (trolley, frame, burners, hood, collector and ducting), the smoke exhaust system and general measuring equipment. These components are specified in 4.2 to 4.7. Design drawings are given in Annex E. Dimensions given in the drawings are nominal unless tolerances…
ISO 811 – Textile Fabrics – Determination of Resistance to Water Penetration – Hydrostatic pressure test / Testing Equipment 4 Apparatus 4.1 The apparatus used for the test should be designed to comply with the following conditions. 4.1.1 It should be possible to clamp the specimen of fabric in such a way that a) it…
8.4 Determination of flexing resistance of outsole 8.4.1 Rigidity test8.4.1.1 Apparatus8.4.1.1.1 Smooth metal hinged plate, fixed to a rigid base.8.4.1.1.2 Clamping device, to fix the forepart of the footwear to be tested to the rigid base.8.4.1.1.3 Sensor, capable of measuring force in the range 0 N to 50 N, to a tolerance of ±1 %,…
Unpacking of the machines First of all, gently unpack the machine. Normally, a full pack of the machine will come to the customer with: Place the bath and appropriate location in your lab. Be noted hydrostatic pressure testing will have some water vapor from the bath when you open the door and some water outlets…
1- Download the installation folder of software 2- Go through below installation file and “Run as administrator” 3- Install the software in default root and don’t change the installation root 4- From start menu Run the program as administrator 4- Then you will see a file name “VICAT.dat” in the root of “C” drive. This…
